Agricultural Machinery Manufacturers, Farm Equipment Suppliers,
Agricultural Machinery Suppliers, Cultivation Machinery Suppliers / manufacturers, Tillage Machinery Suppliers / manufacturers, Horticultural Products East Africa, East Africa, Kenya, Uganda, Tanzania
Equipment Name:
Name:
Company:
Email:
Tel:
Comments:  


Enter Code
 

The Ndume GM50 Hammer Mill





The GM50 is a large capacity, robust, durable all-purpose mill capable of dealing with fodder, roughage and grain of all types. It incorporates new as well as well-proven features thus giving more appeal to a greater range of users.

The GM50's capacity will of course vary according to
1) Size of screen fitted,
2) driving HP available,
3) material being milled and
4) moisture content of the material.
Under normal circumstances, the mill will produce in excess of 14 bags of maize flour per hour. It's star feature is the low RPM requirement (2300 - 2600).

The GM50 has long-life hardened hammers which are fixed to a massive 2" rotor shaft firmly secured and running between two heavy duty self-centering bearings which of course eliminates vibration. It also has a huge blower of special design, producing a massive air stream which will draw all the ground meal and leave the screen clear, and carry the meal 40ft and more. Extension pipes are available. The mill's convenient feeding chute is large and fitted with swinging baffle plates for operator safety. The extra-large cyclone is matched to the mill to guarantee clean, economical, trouble-free milling.

Every mill leaving the Ndume factory in Gilgil is test-run, and carries a guarantee.

Specifications

Speed of mill rotor
 2000 to 2600
 Drive  Electric Motor
 Power Requirement  50 - 100 HP
 Rotor Shaft Size  2" Dia, with keyway
 Bearings  Heavy-duty 2" sealed flange.
 Screen  Interchangeable and wide selection. Screen area 535 sq. In
 Grinding Plate Area  300 Sq In
 Hammers  24 pcs, fixed, Hardened Steel
 Bagging
 Single or double spout cyclone
   
Dimensions

Mill 3' x 9', Cyclone 7' x 9'
Floor space required complete unit 7' x 6'
Weight: Mill 200kg, Cyclone 94kg

The Manufacturer Reserves the Right to Alter Designs and Specifications without Notice

  Conservation Tillage equipment, East Africa, Kenya, Tanzania

  NDUME LIMITED
Phone:      020-2186668/9, 2186671/2
Address:   PO Box 62, 20116 Gilgil, Kenya
Email:        info@ndumekenya.com
Website:   www.ndumekenya.com
  Airport handling Equipment
Chisel Ploughs
  Grain Auger 
  Cultivators
  Harrows
  Seeders and Planters
  Horticulture
 

 

  Grain Milling
  Wood Stoves and Water Heaters
  Tipping and Non Tipping Trailers
  Water- Driven Water Pumps
  Damscoops and Land Levelers
  Lawn and Field 
Copyright © 2010, All Rights Reserved Ndume Ltd.